Industrial Products
Specialize in all aspects of harsh environment electronics manufacturing.
- MG5K
Built for both commercial and recreational use, the MG5K enhances performance, safety, and user
experience in any environment.
Overview of Features:
- ● USB Type-C Connector
- ● Wi-Fi & Bluetooth Communication
- ● GPS Receiver for Speedometer Applications
- ● Touchscreen
- ● 3 Physical Buttons
- ● Space Saving Instrumentation
System Specs:
- ● IP67 Rated
- ● 1000 Nit Sunlight Readable Display
- ● 180° Viewing Angle
- ● 3 Physical Buttons for Additional Control
- ● CAN Bus Communication: J1939, NMEA 200K and Smartcraft®
- ● 6 Software Configurable Inputs
- MCD
The intuitive daylight readable NMEA2000 device operates with Lowrance and Garmin N2K Fuel Flow Sensors for gasoline powered marine engines.
Overview of Features:
- ● Customizable
- ● Field reprogrammable through microUSB
- ● 2 universal inputs
- ● CAN interface
- ● Conditional NMEA 2000 compliance
- ● Ambient light sensor
- ● STM32F412 microcontroller
- ● TouchGFX graphics engine and library
- ● External memory
- Harsh Environment Enclosure
Our harsh environment enclosures are rugged, environmentally sealed solutions for printed circuit board applications.
Overview of Features:
- ● 16381-NY-000 (black, equivalent to EEC-325X4B & AIPXE-325X4B)
- ● 16381-PC-000 (clear, equivalent to AIPXE-325X4B-E017)
- ● Compatible with headers DTM13-12P & ATM13-12P single & dual connector headers
-
● Optional configurations:
Vent Hole, USB Programming Port & Heatsink (available upon request)
System Specs:
- Overall Size: 113.9mm long X 118.5mm wide X 34.5mm tall (4.5in X 4.7in X 1.4in)
- Mounting Pattern: 101.6 (4 in), hole sized for ¼in and/or 6mm fasteners
-
Material:
- 16381-NY-000:- Black Nylon
- 16381-PC-000:- Clear Polycarbonate
- Touch Tek 4.0
Switch-panel power distribution system with programmable outputs, plus interlock programming.
Overview of Features:
- ● Operational temp: -40°C to 80°C
- ● Dustproof
- ● Operating voltage: 8 - 16VDC
- ● On state current consumption: 500mA (approx.)
- ● Protection
- ● Reverse polarity
- ● Backfeed
- ● Under/over voltage
System Specs:
- ● Six 20A outputs
- ● <.5 mA quiescent current draw
- ● Programmable outputs
- ● Interlock programmings
- ● Audible/lighting control options
- ● Built in warnings/alerts
- Wireless I/O
Riverside’s Wireless I/O Controller (WIOC) is a fully customizable controller for harsh environments.
System Specs:
- ● Operating voltage: 9-18VDC
- ● Operating temperature: - 30˚C to 70˚C
- ● Supply Voltage sensing
- ● Environmental rating: IP67
- ● Bluetooth LE communication with customizable phone app
- ● CAN bus communication
- ● 433MHz receiver for Key Fobs
- ● 6 Half Bridge Driver Outputs
- ● 7 LED indicators
- ● 1 Analog Output
- ● 2 General Purpose Inputs with Pull-Up or Down
- ● 3 Quadrature Encoder Interface
- ● 8, 14, 23 or 35 pin connector depending on customer’s needed I/O
- CDR 400
Solid state, heavy-duty battery disconnect switch with built-in, selectable ignition interlock to protect the vehicle’s alternator.
Overview of Features:
- ● Selectable 1-30 min. shut-down delay off timer
- ● Loss of ground and faulty ground protection
- ● Low voltage shut down < 8VDC
- ● Controlled ramp ON and OFF
- ● Rapid ON/OFF cycling prevention protection
- ● System on LED and Override LED indication
System Specs:
- ● Operating voltage: 9-18VDC
- ● Off-state current draw: 6.5mA
- ● On resistance: .000220hm
- ● Operating temp: -40˚C to 85˚C
- ● Environmental: IP67
- Terminal Stud Blocks
A single stud terminal block can safely handle up to 400A of current.
Features:
- ● Provides clean ground or power connections
- ● Tested up to 300˚F
- ● 12 or 24 VDC compatible
- ● Available with 5/16, 1/2 and 3/8” diameter bolts
- ● Optional red base color available
- ● Base measures 3” x 1.5” x .0425”
